Cootamundra Wattle
Acacia baileyanaUSDA | Grow Zone
9-11Outdoors all year in zones 9 to 11. Anywhere colder, keep it as a houseplant. Protect it below 25°F.
- Light
- Full sun, 6-8 hours
- Water
- Top inch dry between waterings
- Humidity
- Moderate humidity preferred
- Temperature
- 65-85°F (18-29°C)
- Difficulty
- Beginner
- Growth
- Moderate
- Mature size
- Up to 20 ft tall
- Pets
- Mildly toxic to pets
Cootamundra Wattle, or Acacia baileyana, is a stunning Australian native tree known for its vibrant yellow flowers. It thrives in sunny conditions and is valued for its drought tolerance and ornamental beauty.
Ask Vesper about Cootamundra Wattle
Ideal temperature
65-85°F is where it grows fastest. Below 25°F cold damage starts.
Spacing and harvest
- Mature size
- Up to 20 ft tall
- Plant apart
- 120-180 in
- Frost
- Half hardy: light frost only
Everything it needs
9 essentials at a glance
Watering
Water the Cootamundra Wattle regularly during its first growing season to establish strong roots, allowing the top inch of soil to dry out between waterings.
Once established, it is drought-tolerant and requires less frequent watering, typically every 2-3 weeks. Signs of over-watering include yellowing leaves and root rot, while under-watering may cause leaf drop and wilting.
Light
This plant thrives in full sun, requiring at least 6-8 hours of direct sunlight daily.
It prefers a bright, open location but can tolerate partial shade. However, too much shade can lead to leggy growth and reduced flowering.
Soil
Acacia baileyana prefers well-draining soil with a slightly acidic to neutral pH (6.0-7.0).
A sandy or loamy mix is ideal, and adding organic matter can improve drainage. Avoid heavy clay soils that retain moisture.
Humidity
This species is not particularly sensitive to humidity and can adapt to a range of levels.
However, it benefits from moderate humidity. To increase humidity, mist the plant occasionally or place it on a pebble tray with water. Signs of low humidity include leaf curling and browning tips.
Temperature
The ideal temperature range for Cootamundra Wattle is between 65-85°F (18-29°C).
It is hardy in USDA zones 9-11 and can tolerate light frost but may suffer in extreme cold. Protect from temperatures below 25°F (-4°C).
Fertilizing
Cootamundra wattle is adapted to nutrient-poor Australian soils and can obtain nitrogen through root associations.
For a newly planted shrub or tree in the ground, avoid routine fertilizer while its roots establish; add phosphorus or potassium only if a soil test shows a deficiency. In a container, wait 6 weeks after potting into fresh mix, then apply a low-phosphorus native-plant fertilizer, such as 2-1-2, at half strength monthly during active spring and summer growth; stop when growth slows and resume in spring. An established plant in the ground usually needs no routine feeding; feed at most once or twice in early spring only if a soil test or symptoms such as pale leaves and short new growth indicate a need. Excess fertilizer can cause leaf scorch or overly soft growth.
Pruning
Prune Cootamundra Wattle in late winter or early spring before new growth begins.
Use clean, sharp pruning shears to remove any dead or damaged branches and to shape the plant. Light pruning encourages bushier growth, while heavy pruning should be avoided as it can stress the plant.
Repotting
Repot young Cootamundra Wattles every 1-2 years or when they outgrow their container.
Choose a pot that is 1-2 inches larger in diameter. Signs that repotting is needed include roots growing out of the drainage holes and stunted growth. When repotting, gently loosen the roots and place in fresh, well-draining soil.
Propagation
Cootamundra Wattle can be propagated from seeds or cuttings.
For seeds, soak them in water for 24 hours before planting to enhance germination. Sow in a well-draining mix and keep moist until germination occurs, which may take 2-4 weeks. For cuttings, take semi-hardwood cuttings in late spring or early summer, dip in rooting hormone, and plant in a sandy mix.
When it's unhappy
Leaf drop
Why it happens
Typically caused by stress from over-watering or sudden changes in temperature.
How to fix it
Adjust watering habits and ensure the plant is in a stable environment.
Yellowing leaves
Why it happens
Often indicates nutrient deficiency or over-watering.
How to fix it
Check soil moisture and consider a balanced fertilizer if nutrient deficiency is suspected.
Root rot
Why it happens
Caused by excessive moisture and poor drainage.
How to fix it
Ensure proper drainage and reduce watering frequency.
Pests (aphids, scale)
Why it happens
Common pests that can infest the plant, especially in warm weather.
How to fix it
Treat with insecticidal soap or neem oil as needed.
Fungal diseases
Why it happens
High humidity and poor air circulation can lead to fungal infections.
How to fix it
Improve air circulation and avoid overhead watering.
Care through the year
Spring
In spring, monitor for new growth and adjust watering as needed. Fertilize if the plant is young and establishing.
Summer
During summer, ensure the plant receives adequate water, especially in hot weather. Watch for pests and treat as necessary.
Fall
In fall, reduce watering as the plant prepares for dormancy. Prune any dead or damaged branches before winter.
Winter
In winter, protect the plant from frost and extreme cold. Water sparingly, allowing the soil to dry out between waterings.
Toxicity & Safety
Cootamundra Wattle is considered mildly toxic to pets and humans. Ingestion of leaves or seeds may cause gastrointestinal upset, including vomiting and diarrhea.
Good to know
Why are my Cootamundra Wattle leaves turning yellow?
Yellowing leaves can indicate over-watering or nutrient deficiency. Check the soil moisture and consider a balanced fertilizer if needed.
How often should I water my Cootamundra Wattle?
Water regularly during the first growing season, allowing the top inch of soil to dry out between waterings. Once established, water every 2-3 weeks.
What type of soil is best for Cootamundra Wattle?
This plant prefers well-draining soil with a slightly acidic to neutral pH. A sandy or loamy mix is ideal for healthy growth.
When is the best time to prune Cootamundra Wattle?
Prune in late winter or early spring before new growth begins to encourage bushier growth and remove any dead or damaged branches.
How can I propagate Cootamundra Wattle?
You can propagate from seeds by soaking them before planting or from semi-hardwood cuttings taken in late spring or early summer.
Is Cootamundra Wattle toxic to pets?
Yes, it is considered mildly toxic to pets and humans, with ingestion potentially causing gastrointestinal upset.
What are the signs of root rot in Cootamundra Wattle?
Signs include yellowing leaves, wilting, and a foul smell from the soil. Ensure proper drainage to prevent this issue.

Track this plant in your garden.
Set care reminders, log growth, and join a community of plant lovers.